The Jensen RV Stereo part # JWM60A will be a good replacement for the Memorex Stereo part CDR1000MH. That said, you will need to rewire the new stereo but there is no way around this as none of the aftermarket stereos are going to use the same plug as the Memorex stereo. However, the wires should be labeled so it will be super easy to complete. I have attached a wiring diagram of the Jensen RV Stereo but I don't have one of the Memorex Stereo.
The Jensen RV Stereo requires a 9" wide x... view full answer...
I checked out your Genesis Technologies 3.0 and it's a standard double din sized RV stereo so the iRV RV Stereo # iRV34 you referenced would easily fit in it's place. Wiring-wise you will need to splice in the new harness which would be the case for any new stereo as the harnesses aren't universal. view full answer...
While we have an option available, the iRV33 is not available for direct replacement. I suggest, the iRV RV Stereo # IRV64FR that will fit in your current cutout but is not as tall so a trim piece will be needed. Otherwise this is pretty much a plug-in-play option. The iRV RV Stereo, # IRV64FR is a great option too but requires the a larger cutout, as well as hardwire the wiring harness which is pretty common for stereo installations. view full answer...
Since your previous stereo was smaller than your new iRV RV Stereo # IRV64FR your only option is to trim out the opening larger to fit the new stereo. I recommend trimming the lower panel below the current stereo down as this will look more aesthetically pleasing. view full answer...
Yes, the iRV RV Stereo # 292-101809 does need 12 volt power to work. Each of the in-wall stereos do require 12 volt power. I have added a link to a video review of this stereo as well as a link to our entire selection of RV stereos for you to take a look at. view full answer...
The Replacement Unismart Remote Control for Furrion Indoor TVs, Stereos, and Fireplaces # FR34FR will work with the following RV stereos: DV3100S, DV1230-BL, DV7200S, DV7100, DV3300S-BL, DV3100, DV1100, DV1000.
Unfortunately, your RV information does not provide me with what stereo system that it has. You will need to verify this with a product manual or information on the stereo. If you have one of the above mentioned stereos then the # FR34FR will work for you.
If you do not, please... view full answer...
From what I could find on the Jensen DV2011 it is a single DIN RV stereo. We have the Jensen RV Stereo # JWM70A which is also a single DIN style. The Jensen RV Stereo # JWM70A plays audio from radio signals, CDs, DVDs, and devices connected through Bluetooth, a USB input, or an auxiliary cord. view full answer...
We offer replacement RV stereos. Since RV stereos are not a "fitguided" part, I am not sure what stereo you currently have that needs to be replaced in your RV. The Jensen RV Stereo w DVD Player # JWM60A has cutout dimensions of 9" wide x 6" tall x 5-1/2" deep. If your current cutout is about that size, then the # JWM60A would work.
Or if you let me know what stereo you currently have and what features you want, I would be happy to help recommend the stereo best suited for your needs. view full answer...
We offer replacement RV stereos. Since RV stereos are not a "fitguided" part, I am not sure what stereo you currently have that needs to be replaced.
For a single din stereo, we have the Jensen RV Stereo w DVD Player # JWM70A. This requires a cut-out of 7-1/2" wide x 2-3/4" tall x 6-1/4" deep.
For a double din stereo we have the Jensen RV Stereo w/ DVD Player # JWM40. This requires a cut-out of 7.323 wide x 3.465" tall.
Both of these options provide AM/FM and a CD player. They also provide... view full answer...
The iRV RV Stereo part # 292-101809 is an excellent option with wireless remote, Bluetooth compatibility, AM/FM stereo, and AUX ports. It can read and play CD's and DVD's but not BluRay. There are no RV stereos which play BluRay. view full answer...
The Jensen RV Stereo part # JWM40 is a great stereo for your RV that will allow you to play CD's, DVD's, and other devices connected through Bluetooth. That said, it is not BluRay compatible nor are any of the other RV stereos that I am aware of for that matter. view full answer...
Due to the wide variety of mounting locations there isn't a specific mounting plate available for the iRV RV Stereo # IRV64FR, or any other stereo for that matter. What most people do is get a piece of wood and stain/paint it to match the cabinet the stereo is going in and use it to cover the larger hole and cutout of just what's needed to mount the stereo into it. view full answer...
The iRV RV Stereo # IRV64FR would easily fit in place of the RV stereo you have installed in your 2020 Winnebago Micro Winnie as it was designed for fitting in place of standard RV stereos. This does not have an SD card input but in general you can't put video files on SD cards and have them play on stereos like this. view full answer...
The iRV RV Stereo part # IRV64FR like most RV stereos does not play Blu-Ray. The only way to play Blu-Ray would be to have a physical player hooked up to the TV and you could then transfer that sound from the TV back through the stereo. view full answer...
The iRV RV Stereo part # 292-101079 is as the title states an RV stereo. It is designed to be installed in a trailer which usually requires splicing of wires. If you were to install the stereo in another application like a vehicle then this can be done but again splicing will be needed. There are certain stereos that can offer plug and play instillation for certain vehicles but we don't offer any options for this as this is not a product category we specialize in. view full answer...
For your Jensen Wall Mount RV Stereo # JWM90A, you will want to use the remote in the Replacement Service Package for Jensen Wall Mount RV Stereo # JEN63RR. This kit includes a replacement power harness and a remote. view full answer...
The iRV RV Stereo part # iRV34 is a double din stereo which refers to the size. The majority of touchscreen stereos are also double din so this should be a good replacement size wise although slight trimming may be required between different models.
In regards to the satellite, this would not be hooked up directly to the stereo but rather to the TV and then the TV would be hooked up to the stereo. That said, this would indeed allow you to play the sound from the TV through the stereo... view full answer...
If you have an iRV stereo like the iRV RV Stereo - Single DIN # 292-101809 then you would need to press and hold the "Clock" button for 3 seconds to adjust the hours with the "Volume Knob". Simply turn the knob until the AM switches to PM and then you can press the "Volume Knob" in to switch over to the minutes setting.
If you have a different model iRV stereo then let me know and I can help walk you through changing the time on your model. view full answer...
The Jensen RV Stereo AWN970 is what is considered as a double din which refers to the cutout dimensions needed for installation. Therefore, if you replace this unit with another double din stereo like the iRV RV Stereo part # IRV34 then the cutout size should not need to be altered even though the overall dimensions might be a bit different. That said, these are just guides and trailer manufactures do not always follow them so your best option is to measure the cutout you have now and compare... view full answer...
Hey Curtis, the Magnadyne Linear Series RV4000 you have is a standard double din sized RV stereo that the Jensen RV Stereo # JWM60A would fit well as a replacement since it's the same size. It also it has the Bluetooth and CD player feature. This isn't a direct plug and play solution but there isn't that type of solution available. view full answer...
Go To Results